Hilgeland CH 2 EL cold forming machine for sale by auction
Sochaczew
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
€3,500
Excluding VAT
Poland, Sochaczew
€1,000
Excluding VAT
Poland, Sochaczew
€3,500
Excluding VAT
Poland, Sochaczew
€4,000
Excluding VAT
Poland, Sochaczew
€3,500
Excluding VAT
Poland, Sochaczew
€8,000
Excluding VAT
Poland, Sochaczew
€3,000
Excluding VAT
Poland, Tychy
€4,500
Excluding VAT
Poland, Sochaczew
€4,500
Excluding VAT
Poland, Sochaczew
maximum wire diameter in commercial screws and rivets: 8.0 mm,
maximum forged screw length: 100 mm,
maximum wire cutting length: 120 mm,
capacity: 226 pcs/min,
overall dimensions (L x W x H): 4.0 x 1.7 x 1.6 m + Euro-pallet (1.2 x 0.8 m)
maximum wire diameter in high-strength screws: 7.1 mm, maximum wire diameter in commercial screws and rivets: 8.0 mm, maximum forged screw length: 100 mm, maximum wire cutting length: 120 mm, capacity: 226 pcs/min, overall dimensions (L x W x H): 4.0 x 1.7 x 1.6 m + Euro-pallet (1.2 x 0.8 m)
length: 5200
height: 1600
width: 1700
maximaler Drahtdurchmesser in handelsüblichen Schrauben und Nieten: 8,0 mm,
maximale Länge der geschmiedeten Schraube: 100 mm,
maximale Drahtschnittlänge: 120 mm,
Kapazität: 226 Stück/min,
Gesamtmaße (L x B x H): 4,0 x 1,7 x 1,6 m + Europalette (1,2 x 0,8 m)
diámetro máximo del alambre en tornillos y remaches comerciales: 8,0 mm,
longitud máxima del tornillo forjado: 100 mm,
longitud máxima de corte del alambre: 120 mm,
Capacidad: 226 piezas/min,
Dimensiones totales (largo x ancho x alto): 4,0 x 1,7 x 1,6 m + europalet (1,2 x 0,8 m)
langan enimmäishalkaisija kaupallisissa ruuveissa ja niitissä: 8,0 mm,
taotun ruuvin enimmäispituus: 100 mm,
langan enimmäisleikkauspituus: 120 mm,
kapasiteetti: 226 kpl/min,
kokonaismitat (P x L x K): 4,0 x 1,7 x 1,6 m + Euro-lava (1,2 x 0,8 m)
diamètre maximum du fil dans les vis et rivets commerciaux : 8,0 mm,
longueur maximale de la vis forgée : 100 mm,
longueur maximale de coupe du fil : 120 mm,
capacité : 226 pièces / min,
Dimensions totales (L x l x H) : 4,0 x 1,7 x 1,6 m + europalette (1,2 x 0,8 m)
diametro massimo del filo in viti e rivetti commerciali: 8,0 mm,
lunghezza massima della vite forgiata: 100 mm,
lunghezza massima di taglio del filo: 120 mm,
capacità: 226 pz/min,
Dimensioni d'ingombro (L x P x A): 4,0 x 1,7 x 1,6 m + Euro-pallet (1,2 x 0,8 m)
Maximale draaddiameter in in de handel verkrijgbare schroeven en klinknagels: 8,0 mm,
maximale lengte gesmede schroef: 100 mm,
maximale draadsnijlengte: 120 mm,
capaciteit: 226 stuks/min,
totale afmetingen (L x B x H): 4,0 x 1,7 x 1,6 m + Europallet (1,2 x 0,8 m)
maksymalna średnica drutu w komercyjnych i nitach: 8,0 mm,
maksymalna długość kutego ślimaka: 100 mm,
maksymalna długość cięcia drutu: 120 mm,
wydajność: 226 szt./min,
wymiary gabarytowe (dł. x szer. x wys.): 4,0 x 1,7 x 1,6 m + europaleta (1,2 x 0,8 m)
diametrul maxim al firului în șuruburi și nituri comerciale: 8,0 mm,
lungimea maximă a șuruburilor forjate: 100 mm,
lungime maximă de tăiere a sârmei: 120 mm,
capacitate: 226 buc/min,
dimensiuni totale (L x l x î): 4,0 x 1,7 x 1,6 m + europalet (1,2 x 0,8 m)
Maximal tråddiameter i kommersiella skruvar och nitar: 8,0 mm,
Maximal längd av smidda skruvar: 100 mm,
Maximal klipplängd för tråd: 120 mm.
kapacitet: 226 st/min,
Totala mått (L x B x H): 4,0 x 1,7 x 1,6 m + Europapall (1,2 x 0,8 m)