Studer S40 cylindrical grinding machine for sale by auction
Walldorf
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
€2,500
Excluding VAT
Germany, Neuss
€2,500
Excluding VAT
Germany, Chemnitz
€2,500
Excluding VAT
Germany, Neuss
€2,350
Excluding VAT
Germany, Schierling
€2,500
Excluding VAT
Germany, Westerheim
€2,500
Excluding VAT
Germany, Cochem
€2,500
Excluding VAT
Germany, Konz
€2,500
Excluding VAT
Germany, Neuss
€2,500
Excluding VAT
1,300 kg
Germany, Schellerten
€2,500
Excluding VAT
Germany, Bocholt
€2,500
Excluding VAT
Germany, Bocholt
€2,750
Excluding VAT
Germany, Schierling
€2,500
Excluding VAT
Germany, Ahaus
€2,500
Excluding VAT
Germany, Westerheim
€2,500
Excluding VAT
Germany, Westerheim
€2,500
Excluding VAT
Germany, Neuss
€2,500
Excluding VAT
Germany, Neuss
€2,500
Excluding VAT
Germany, Neuss
€2,450
Excluding VAT
Germany, Schierling
€2,750
Excluding VAT
Germany, Schierling
Tip height: 125 mm
Center width: 650 mm
Grinding length: 650 mm
Grinding diameter: 250 mm
LONGITUDINAL CARRIAGE
Speed: 50–9000 mm/min
Minimum automatic travel: 0.1 mm
Max. travel: 400 mm
GRINDING HEAD
Grinding wheel:
- Diameter: 400 mm
- Width: 80 mm
- Bore: 127 mm
Power requirement: 3 kW
Circumferential speed: 30 m/s
Starting position: 210 mm
Swivel range: 0–90 degrees
Freely programmable speed range: 30–675 rpm
Mounting taper: Morse 5
Collets: W-25
Power requirement: 1.1 kW
Tailstock
Mounting Taper: Morse 3
Tip stroke: 30 mm
Spitzenhöhe: 125 mm
Spitzenweite: 650 mm
Schleiflänge: 650 mm
Schleifdurchmesser: 250 mm
LÄNGSSCHLITTEN
Geschwindigkeit: 50–9000 mm/min
Minimaler automatischer Verfahrweg: 0,1 mm
Max. Verfahrweg: 400 mm
SCHLEIFKOPF
Schleifscheibe:
- Durchmesser: 400 mm
- Breite: 80 mm
- Bohrung: 127 mm
Leistungsbedarf: 3 kW
Umfangsgeschwindigkeit: 30 m/s
Ausgangsposition: 210 mm
Schwenkbereich: 0–90 Grad
Drehzahlbereich frei programmierbar: 30–675 U/min
Aufnahmekegel: Morse 5
Spannzangen: W-25
Leistungsbedarf: 1,1 kW
REITSTOCK
Aufnahmekegel: Morse 3
Spitzenhub: 30 mm
Spitzenhöhe: 125 mm
Spitzenweite: 650 mm
Schleiflänge: 650 mm
Schleifdurchmesser: 250 mm
Minimaler automatischer Verfahrweg: 0,1 mm
Max. Verfahrweg: 400 mm
Durchmesser: 400 mm
Breite: 80 mm
Bohrung: 127 mm
Leistungsbedarf: 3 kW
Umfangsgeschwindigkeit: 30 m/s
Ausgangsposition: 210 mm
Schwenkbereich: 0–90 Grad
Drehzahlbereich frei programmierbar: 30–675 U/min
Aufnahmekegel: Morse 5
Spannzangen: W-25
Spitzenhub: 30 mm
Länge: 2600
Höhe: 1900
Breite: 2300
HAUPTABMESSUNGEN
LÄNGSSCHLITTEN
SCHLEIFKOPF
Schleifscheibe
Leistungsbedarf: 1,1 kW
REITSTOCK
Aufnahmekegel: Morse 3
Hauteur de la pointe : 125 mm
Largeur centrale : 650 mm
Longueur de meulage : 650 mm
Diamètre de meulage : 250 mm
CHARIOT LONGITUDINAL
Vitesse : 50–9000 mm/min
Course automatique minimale : 0,1 mm
Débattement max. : 400 mm
TÊTE DE
MEULAGE
Meule:
- Diamètre : 400 mm
- Largeur : 80 mm
- Alésage : 127 mm
Puissance requise : 3 kW
Vitesse circonférentielle : 30 m/s
Position de départ : 210 mm
Plage de pivotement : 0 à 90 degrés
Plage de vitesse librement programmable : 30 à 675 tr/min
Cône de montage : Morse 5
Pinces de serrage : W-25
Puissance requise : 1,1 kW
Poupée
mobile
Cône de montage : Morse 3
Course de la pointe : 30 mm
Altezza della punta: 125 mm
Larghezza centrale: 650 mm
Lunghezza di rettifica: 650 mm
Diametro di rettifica: 250 mm
CARRELLO LONGITUDINALE
Velocità: 50–9000 mm/min
Corsa automatica minima: 0,1 mm
Max. corsa: 400 mm
TESTA
DI RETTIFICA
Mola:
- Diametro: 400 mm
- Larghezza: 80 mm
- Alesaggio: 127 mm
Potenza richiesta: 3 kW
Velocità circonferenziale: 30 m/s
Posizione di partenza: 210 mm
Campo di rotazione: 0–90 gradi
Gamma di velocità liberamente programmabile: 30–675 giri/min
Cono di montaggio: Morse 5
Pinze: W-25
Potenza richiesta: 1,1 kW
Contropunta
Cono di montaggio: Morse 3
Corsa della punta: 30 mm
Hoogte punt: 125 mm
Breedte midden: 650 mm
Slijplengte: 650 mm
Slijpdiameter: 250 mm
LANGSLIGGER
Snelheid: 50-9000 mm/min
Minimale automatische verplaatsing: 0,1 mm
Max. verplaatsing: 400 mm
SLIJPKOP
Slijpschijf:
- Doorsnede: 400 mm
- Breedte: 80 mm
- Boring: 127 mm
Benodigd vermogen: 3 kW
Omtreksnelheid: 30 m/s
Startpositie: 210 mm
Draaibereik: 0-90 graden
Vrij programmeerbaar toerentalbereik: 30–675 tpm
Montage conus: Morse 5
Spantangen: W-25
Benodigd vermogen: 1,1 kW
Losse kop
Conus monteren: Morse 3
Tip slag: 30 mm