Knebel HY75 GRS drilling rig for sale by auction
Sjælland
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+45 44 65 ...
Show
+45 44 65 06 07
€7,373
Netherlands, Steenwijk
Netherlands, Steenwijk
Germany, Niederfullbach bei Coburg
Make: Knebel
Model: HY75 GRS
Note: - Unimog Chassis
Vin/Chassis no.: .
Year: 1978
Hours approx.: Unknown
KM: 110,000
Chassi: Mercedes
Chassi type: Unimog
Axles: 4 WD
Tires % good: 50
CE marked: Yes
Transport dim. (L x W x H) m: 8,0 x 2,1 x 3,4
Weight kg approx.: 5,300
Total weight kg: 6,000
License plates: Is not included, Registration certificate included.
Is visually reviewed, but not fully tested in all functions: Yes
Engine OK: Yes
Might be in operation until delivery: Yes
Visual condition (1-5) 5=best: 3
Technical condition (1-5) 5=best: 3
Categories:
Construction Equipment & Attachments
,
Drilling rigs
Good and fully functional drilling rig with 8 m tower. Drill head included. NB: Drill rods and crown are not included. Have worked with "dry-drilling", but there is a passage in the drill head to be able to do "flushing and air-raising-lowering-drilling". See attached PDF brochure: Guide Mast Mine. free height under top wheel: 6.5 m Max. load on hook: 1200 Kp. Max. load over top wheel: 1200 Kp. The guide mast is raised by a hydraulic cylinder. Hydraulic Power Swivel Max. working lift: 5400 mm Max. pull-down: 1500 Kp. Max. pull-up 3000 Kp. Speed infinitely variable downward: 0-0.8m/sec. Speed infinitely variable upwards: 0-0.5m/sec. Quick-acting in both directions. Max. speed of power swivel: 1 gear: 65 RPM variable 2 gear: 130RPM variable. Max. torque of power swivel: 1st gear: 300 Kpm. 2 gears: 156 Kpm. Hollow drill spindle: 85 mm. Hydraulic power swivel: 90 degree mechanical tipped. Winch One fully hydraulic winch with variable wire speed. Automatic winch brakes. Wire capacity: 38 m Ø 10 mm on 1 layer, 250 m Ø 10 mm on 7 layers. Max. wire pull: 1200 Kp. Max. wire speed: 1 layer: variable 0-85 m/m/min. Warping End Max. torque: 40 Kpm. Wire speed: Infinitely variable. Knebel HY75 GRS - Unimog Chassis
Fabrikat: Knebel
Typ: HY75 GRS
Hinweis: - Unimog Chassis
Fahrgestell Nr.: .
Baujahr: 1978
Stunden cirka: Unbekannt
KM: 110.000
Fahrgestell: Mercedes
Fahrgestell Typ: Unimog
Radformel: 4 WD
Reifen % gut: 50
CE Marke: Ja
Transportmass (L x B x H) m: 8,0 x 2,1 x 3,4
Gewicht kg cirka: 5.300
Gesamtgewicht kg: 6.000
Kennzeichenschilder: Nicht dabei, Fahrzeugbrief ist dabei.
Wird visuell überprüft, aber nicht in allen Funktionen vollständig getestet: Ja
Motor OK: Ja
Eventuel bis zur Lieferung in Betrieb sein: Ja
Visuell Zustand (1-5) 5=am besten: 3
Technisch Zustand (1-5) 5=am besten: 3
Kategorien:
Baumaschinen & Anbaugeräte
,
Bohrgeräte
Gutes und voll funktionsfähiges Bohrgerät mit 8 m Turm. Bohrkopf enthalten. NB: Bohrstangen und Krone sind nicht im Lieferumfang enthalten. Habe mit "Trockenbohren" gearbeitet, aber es gibt einen Durchgang im Bohrkopf, um "Spülen und Luft-Heben-Senken-Bohren" machen zu können. Siehe beigefügte PDF-Broschüre: Führungsmast Mine. freie Höhe unter Oberrad: 6,5 m max. Last am Haken: 1200 Kp. max. Belastung über Oberrad: 1200 Kp. Der Führungsmast wird durch einen Hydraulikzylinder angehoben. Hydraulischer Power Swivel max. Arbeitshub: 5400 mm max. Niederzug: 1500 Kp. max. Klimmzug 3000 Kp. Geschwindigkeit stufenlos nach unten regelbar: 0-0,8m/sec. Geschwindigkeit stufenlos nach oben: 0-0,5m/sec. Schnell wirkend in beide Richtungen. max. Drehzahl Power Swivel: 1. Gang: 65 U/min variabel 2. Gang: 130 U/min variabel. max. Drehmoment Power Swivel: 1. Gang: 300 Kpm. 2 Gänge: 156 Kpm. Hohlbohrspindel: 85 mm. Hydraulischer Kraftschwenker: 90 Grad mechanisch gekippt. Winde Eine vollhydraulische Winde mit variabler Seilgeschwindigkeit. Automatische Windenbremsen. Seilkapazität: 38 m Ø 10 mm auf 1 Lage, 250 m Ø 10 mm auf 7 Lagen. max. Drahtzug: 1200 Kp. max. Siebgeschwindigkeit: 1 Lage: variabel 0-85 m/m/min. Warping-Ende max. Drehmoment: 40 Kpm. Drahtgeschwindigkeit: Stufenlos regelbar. Knebel HY75 GRS - Unimog Chassis
Fabrikat: Knebel
Model: HY75 GRS
Note: - Unimog Chassis
Stel nr.: .
Årgang: 1978
Timer ca.: Ubekendt
KM: 110.000
Chassis: Mercedes
Chassis type: Unimog
Aksler: 4 WD
Dæk % gode: 50
CE mærket: Ja
Transportmål (L x B x H) m: 8,0 x 2,1 x 3,4
Vægt kg ca.: 5.300
Totalvægt kg: 6.000
Nummerplader: medfølger ikke, registreringsattest medfølger.
Er visuelt gennemgået, men ikke testet fuldt ud i alle funktioner: Ja
Motor OK: Ja
Er eventuelt i drift frem til levering: Ja
Visuel stand (1-5) 5=bedst: 3
Teknisk stand (1-5) 5=bedst: 3
Kategorier:
Entreprenørmaskiner & udstyr
,
Borerigge
God og fuld funktionsdygtig borerig med 8 m tårn.
Borehoved medfølger.
NB: Bore stænger og krone medfølger ikke. Har arbejdet med "tør-boringer", men der er gennemgang i borerhovedet til at kunne lave "skylle og luft-hæve-sænke-boringer".
Se vedhæftede PDF brochure:
Guide Mast
Min. free height under top wheel: 6,5 m
Max. load on hook: 1200 Kp.
Max. load over top wheel: 1200 Kp.
The guide mast is raised by a hydraulic cylinder.
Hydraulic Power Swivel
Max. working lift: 5400 mm
Max. pull-down: 1500 Kp.
Max. pull-up 3000 Kp.
Speed infinitely variable downward: 0-0,8m/sec.
Speed infinitely variable upward: 0-0,5m/sec.
Quick-acting in both directions.
Max. speed of power swivel:
1 gear: 65 RPM variable 2 gear: 130RPM variable.
Max. torque of power swivel:
1st gear: 300 Kpm. 2 gear: 156 Kpm.
Hollow bore spindle: 85 mm.
Hydraulic power swivel: 90 degree mechanical tipped.
Winch
One fully hydraulic winch with variable wire speed.
Automatic winch brakes.
Wire capacity: 38 m Ø 10 mm on 1 layer, 250 m Ø 10 mm on 7 layers.
Max. wirepull: 1200 Kp.
Max. wire speed: 1 layer: variable 0-85 m/m/min.
Warping End
Max. torque: 40 Kpm.
Wire speed: Infinitely variable.
Knebel HY75 GRS - Unimog Chassis
Fabrikat: Knebel
Modell: HY75 GRS
Anteckning: - Unimog Chassis
Chassi nr.: .
Årsmodell: 1978
Timmar cirka: Okänd
KM: 110 000
Chassi: Mercedes
Chassi typ: Unimog
Axelkonfiguration: 4 WD
Däck återstår %: 50
CE-märkt: Ja
Transportmått (L x B x H) m: 8,0 x 2,1 x 3,4
Vikt kg cirka: 5 300
Totalvikt kg: 6 000
Registreringsskylt: Ingår inte, registreringsbevis bifogas.
Visuellt granskad men inte testad helt i alla funktioner: Ja
Motor OK: Ja
Är eventuellt i drift fram till leverans: Ja
Visuellt betyg (1-5) 5=bäst: 3
Tekniskt betyg (1-5) 5=bäst: 3
Kategorier:
Entreprenadmaskiner & udrustning
,
Borriggar
Bra och fullt fungerande borrigg med 8 m torn. Borrhuvud ingår. OBS: Borrstänger och krona ingår ej. Har jobbat med "torrborrning" men det finns en passage i borrhuvudet för att kunna göra "spolning och lufthöjning-sänk-borrning". Se bifogad PDF-broschyr: Guide Mast Mina. fri höjd under topphjul: 6,5 m Max. belastning på krok: 1200 Kp. Max. last över topphjul: 1200 Kp. Styrmasten höjs av en hydraulcylinder. Hydraulisk Power Swivel Max. arbetslyft: 5400 mm Max. neddragning: 1500 Kp. Max. pull-up 3000 Kp. Hastighet steglöst nedåt: 0-0,8m/sek. Hastighet steglöst uppåt: 0-0,5m/sek. Snabbverkande åt båda hållen. Max. hastighet på kraftsväng: 1 växel: 65 RPM variabel 2 växlar: 130 RPM variabel. Max. vridmoment för kraftsvirvel: 1:a växeln: 300 Kpm. 2 växlar: 156 Kpm. Ihålig borrspindel: 85 mm. Hydraulisk kraftsväng: 90 grader mekanisk tippad. Vinsch En helhydraulisk vinsch med variabel vajerhastighet. Automatiska vinschbromsar. Trådkapacitet: 38 m Ø 10 mm på 1 lager, 250 m Ø 10 mm på 7 lager. Max. vajerdrag: 1200 Kp. Max. trådhastighet: 1 lager: variabel 0-85 m/m/min. Skev slut Max. vridmoment: 40 Kpm. Trådhastighet: Steglöst variabel. Knebel HY75 GRS - Unimog Chassis