IMA Combima Systems/I/R75/1370 edgebander
Kaiserslautern
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+49 162 40...
Show
+49 162 4027581
Location: DE
Workpiece length: 250–2800 mm
Workpiece width: 115–1300 mm
Workpiece thickness: 8 mm (format only) to 40 mm
Smallest workpiece: 144 × 250 × 8 mm
Largest workpiece: 2800 × 1300 × 38 mm
Workpiece weight: max. 50 kg
Workpiece shape: rectangular
Surface material: direct coating (melamine), paper, foil, veneer
Coating material overhang at sides: 10 mm
Cover thickness: 3.0 / 4.0 / 8.0 mm
Machining allowance: edge thickness
Frame material: vertically arranged chipboard (reduced feed)
Paper & plastic edges: 0.3–3.0 mm
Veneer edges: 0.5–1.3 mm
Support edge: 3.0 mm
Edge height: 19–104 mm (support edge 97 × 3 mm only for double panels)
Max. upper edge overhang: 2 mm
Paper edge: approx. 0.4 mm, chamfer 15°
Plastic edge: 3.0 mm, radius 3 mm
Max. edge cross-section: 200 mm² (plastic), 135 mm² (veneer)
Constant workpiece clearance from chain conveyor: 38 mm (incl. edge thickness 0.3–3.0 mm)
Throughput width (with 38 mm clearance): min. 115 mm
Workpiece length in feed direction: min. 150 mm
Base height (upper edge of chain conveyor): 960 mm
Feed speed: 6–30 m/min, frequency-controlled
Automatic PU melting system: Quickmelt
Cutting unit: 2 × 660 W, 200 Hz
Milling unit: 1 × 1000 W, 400 V, 200 Hz, 12,000 rpm, 30° swivel
Multiple machining unit: 1 × 660 W, 400 V, 200 Hz, 12,000 rpm
Workpiece length (manual feed): 300–2800 mm
Workpiece (chipboard/MDF)
Workpiece (honeycomb panel
min. feed length 300 mm)
Workpiece length: 300–2800 mm
Workpiece width: 300–1300 mm
Workpiece thickness: 15–100 mm (with 3 mm support edge only as double panel)
Smallest workpiece: 300 × 300 × 15 mm
Largest workpiece: 2800 × 1300 × 100 mm
Workpiece (frame panel
min. feed length 300 mm)
Cover thickness: 8.0 mm
Machining allowance: 5.0 mm
Workpiece length: 300–2800 mm
Workpiece width: 300–1300 mm
Workpiece thickness: max. 50 mm
Edge material and profiles
Edge profiles
With servo cutting knife (2 gluing section)
Machine data
Processing units and systems
Milling/profile milling/grooving units
1 × 6.6 kW
100 Hz
6000 rpm
1 × 8.0 kW
100 Hz
6000 rpm (double clamping unit drive)
1 × 4.4 kW
100 Hz
6000 rpm
1 × 4.4 kW
100 Hz
6000 rpm
1 × 4.4 kW
100 Hz
6000 rpm
1 × 8.0 kW
100 Hz
6000 rpm
Hot-melt adhesive applicator for 2 adhesive beads
300 lg radiator
2 × 1.5 kW for preheating the workpiece edge
Gluing unit for straight edges
edge thickness up to 3 mm (depending on magazine)
2-fold edge magazine for roll material (0.3–3.0 mm)
Servo knife for precise edge cutting
Servo edge feed (incl. for support edges in roll form)
Glue application for workpiece thickness up to 90 mm
Multiple profile scraper unit
Milling unit: 1 × 1000 W
400 V
200 Hz
12,000 rpm
30° swivel
Multiple machining unit: 1 × 660 W
400 V
200 Hz
12,000 rpm
Multiple profile scraping device
Self-probing scraping unit
Buffing unit
Additional equipment
Inclined roller table SFR 1450/2260/15° for longitudinal and transverse operation
Workpiece width: 190–1300 mm
Workpiece thickness: 13–60 mm
Servo insertion system x20
Servo stop system x20