Bürkle Burkle RB gluing equipment

Preis: Contact us for price
Marke: Burkle
2010 Burkle RB
A glue application machine purchased in 2010
The machine can either be resold or serve as a spare parts donor
Space requirement: approx. 16x7.0m
Connected loads: Nominal power 20Kw
Main components: Heavy-duty chain conveyor
roller conveyor
Gantry unit with vacuum pump
Glue application rollers
ALTEK lifting table type AEA-30.12
Machine list
Basic equipment
Item 10 Heavy-duty chain conveyor
Item 20 Portal stacker
Item 30 Roller conveyor with centring unit
Item 40 Roller conveyor
Item 50 Roller applicator
Item 60 Platform for roller applicator
Item 70 Roller conveyor
Item 80 Angle transfer
Item 90 Scissor lift
Item 100 Working platform application area
manually adjustable
Item 110 Glue feed
Item 10 Heavy-duty chain conveyor
Item 10 Heavy-duty chain conveyor
For pallet feed
A welded frame made of rectangular steel bars with height-adjustable feet. Three chain conveyor arms are fitted for transverse transport
The pallets are automatically positioned under the stacker
Length: approx. 3500 mm
Width: approx. 2500 mm
Height: 300 ± 20 mm
Item 20 Portal stacker
Technical description
The straddle stacker has a stable steel construction. The two collection gates are
are constructed from rectangular steel rods. A horizontal drive device consisting of a steel rod is mounted on these openings
The drive carriage runs horizontally on rollers on this rod
A vertical lifting mechanism with an attached suction frame is installed underneath the trolley. The vacuum is generated by a side channel blower mounted on the carriage. The vacuum is channelled through pipes to the lower end of the lifting mechanism and distributed to the suction frames. Frequency-controlled drive set for horizontal and vertical movement
Technical data
Length: approx. 4,700 mm
Number of loading positions: 1
Number of stacking positions: 1
Stacking height: max. 1200 mm incl. pallet
Capacity: approx. 4 pcs. per minute (approx. possible capacity)
Item 30 Roller conveyor with centring unit
Technical description
The basic construction of the roller conveyor consists of a rigid welded frame of rectangular steel bars with adjustable feet
The sprockets are rotated by a chain that is driven tangentially
driven tangentially by a manual motor with variable speed
which is located in the lower
located in the lower section of the base structure. The guide chain runs in plastic slide rails over the entire length of the roller conveyor. The chains can be tensioned using adjusting screws on the motor attachment. The tangential chain drives of the motors are completely covered by protective covers
The roller conveyor is also equipped with a pneumatically operated centring device
Technical data
Length: approx. 3250 mm
Width: approx. 1500 mm
Height: approx. 1500 (- 30 / + 70) mm
Roller pitch: approx. 300 mm
Item 40 Roller conveyor
Technical description
The basic construction of the roller conveyor consists of a rigid welded frame of rectangular steel bars with adjustable feet
The chain wheels are rotated by a chain that is driven tangentially by a
driven tangentially by a manual motor with variable speed
which is located in the lower
located in the lower section of the base structure. The guide chain runs in plastic slide rails over the entire length of the roller conveyor. The chains can be tensioned using adjusting screws on the motor attachment. The tangential chain drives of the motors are completely covered by protective covers
The roller conveyor is also equipped with a pneumatically operated centring device
Technical data
Length: approx. 3250 mm
Width: approx. 1500 mm
Height: approx. 1500 (- 30 / + 70) mm
Roller pitch: approx. 300 mm
Item 50 Roller applicator
For one-sided application of liquid adhesives to flat workpieces
Application unit
Separate
single-rotating direct drive for the application roller
Rubber-covered applicator roller with grooved rings for pressureless end plates
Quick-change coupling for the application roller with spherical bearings and a chain coupling
Separate
single-rotating direct drive for the doctor roller
high differential speed to the application roller (1:20)
Hard rubber squeegee roller with grooved rings for pressureless end plates
with a sensitive squeegee roller adjustment system that can be mounted via a worm gear
rollers
Adjustment of the roller gap on the mechanical digital display on the handwheel
display accuracy 0.1 mm
Parallelism of the rollers can be adjusted using a sliding clutch
Splash-proof bearing
Easy to open bonnet
Height adjustment
Precision lifting gear
hard chrome-plated round columns for guidance
operated by a handwheel
handwheel
Mechanical digital display of throughput height
display accuracy 0.1 mm
High pressure of the pressure roller on the workpiece
Machine frame
Solid frame construction
Good accessibility for maintenance / cleaning
Integrated pull-out cleaning tray
Item 60 Platform for roller applicator
Switching for cleaning
The applicator and squeegee roller rotates even when the protective bonnet is open if the height adjustment and squeegee roller adjustment are set to the safety distance. The safety distances are sensed electrically by a limit switch. Electrical equipment
In accordance with DIN/VDE (EN60204-1)
Operating elements in an ergonomically arranged control panel
Cable connection machine/control cabinet
Control system in a separate control cabinet (800 x 1,400 x 300 mm)
The control cabinet next to the machine is connected to the machine frame on the travelling side
on the drive side
Technical data
Working width 1,300 mm
1 rubber-covered application roller with a diameter of Æ 240 mm
Hardness of the rubber coating 70 Shore
Grooving 20 grooves/"
Width of the application roller 1,416 mm
1 squeegee roller with hard rubber cover with a diameter of Æ 185 mm
Hardness of the rubber cover 85 Shore
Width of the squeegee roller 1,416 mm
Maximum throughput height 120 mm
Length of the machine approx. 1200 mm
Working height 870 +/-50 mm
Weight approx. 1,250 kg
Operating voltage 400/50 V/cycles
Connected load at 50 cycles approx. 3 kW
Speed of the application roller 6 - 40 m/min
Speed of squeegee roller 1 - 6 m/min
Additional equipment
1.0 feed speed
frequency-controlled
Machine design as described above with the following changes
Speed of the transport and application roller 6 - 40 m/min
Speed of the doctor roller 1 - 6 m/min
Connected load at 50 cycles approx. 3.8 kW
2.0 Motorised height adjustment with push button
Offer no. 80973D - Page 13 of 31 - 09.06.2010
3.0 Retractable design for cleaning the machine. Special undercarriage
Chassis including rails under the machine with additional plastic wheels
plastic wheels for a rail-free working area. Including two position
monitoring switches for bypassing line controls
4.0 Height sensing of the roller gap
4.4 Spray pipes for cleaning with flat jet nozzles (min. water pressure 3 bar)
5.0 Special rubber coating of the application roller
5.1 Special grooving of the application roller
6.1 Machine base for working heights above 1100 mm
9.0 Transport system with 3 driven rollers on the infeed side (D=70 mm)
Min. part length: 350 mm
Length of the machine: 1,200 mm
9.1 Transport system with 3 driven rollers on the outfeed side (D=70 mm)
Min. part length: 350 mm
Length of the machine: 1,200 mm
10.0 Machine as described in the previous text with the following additional equipment: Application unit at the bottom is omitted (one-sided glue application from above)
11.0 Throughput height up to 200 mm
Item 70 Roller conveyor
Technical description
The basic construction of the roller conveyor consists of a rigid welded frame made of rectangular steel bars with adjustable feet. The chain wheels are rotated by a chain that is driven tangentially by a manual motor with variable speed
which is located in the lower section of the basic structure. The guide chain runs in plastic slide rails over the entire length of the roller conveyor. The chains can be tensioned using adjusting screws on the motor mounting. The tangential chain drives of the motors are completely covered by
completely covered by protective covers
Technical data
Length: approx. 3250 mm
Width: approx. 1500 mm
Height: approx. 1500 (- 30 / + 70) mm
Roller pitch: approx. 300 mm
Item 80 Angle transfer
Technical description
The basic construction of the roller conveyor with angled transfer consists of a rigid
welded frame made of rectangular steel bars with adjustable feet for a variable infeed
infeed height of +75/-25 mm
Transport rollers with steel cover
galvanised
The chain is driven by a frequency-controlled geared motor
The chain can be tensioned by adjusting screws on the motor attachment
Swivelling toothed belt conveyor arms mounted on the underside for angular transfer
Chain drive by motor with variable speed
Item 90 Scissor lift
For manual loading / stacking of the above-mentioned material types
Scissor lift table
with integrated hydraulic unit
Hydraulic unit
mounted outside the frame of the scissor lift
Lifting table with integrated safety system (safety edge)
The lift table is levelled using a foot switch
Dimensions of the lift table
approx.: 2000 x 1400 mm
Lifting height of the table
approx.: 1200 mm
Max. Stacking height: 1200 mm incl. pallet
Height of the construction
approx.: 360 mm
Max. Stacking weight: 3 tonnes
Lifting speed: 50 mm/s
Additional equipment: Platform extensions to increase the length
Item 100 Working platform support area
manually adjustable
Technical description
2 working platforms for an ergonomic working position at the manual laying station
Manually adjustable to the individual part length to be produced
Platform height: approx. 500 - 700 mm
Pos. 110 Glue supply
Single-circuit system that can be used with either Racoll GXL3 or Latyl ST52
Consisting of
Frame for IBC glue tanks
Glue tanks are provided on site by the customer
Hosing/piping
valves
Filter for Racol
Agitator
Plastic tank for Racoll GXL3
capacity approx. 200 litres
Membrane transfer pump 1" made of PP plastic
Switch cabinet
Quick-release couplings for tank connection
Find more here
show contacts
Contact us at
show contacts