Geka Hydracrop 80 SD power press
Niederlangen6596 km to "United States/Columbus"
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+49 5939 9...
Show
+49 5939 940640
+49 5939 9...
Show
+49 5939 940650
Germany 
Germany, Niederlangen
Germany, Niederlangen
Germany, Niederlangen
Germany, Niederlangen
Germany, Niederlangen
Germany, Niederlangen
Germany, Niederlangen
Austria, Wiener Neudorf
Germany, Eislingen
Germany, Eislingen
Germany, Eislingen
Germany, Eislingen
Germany, Eislingen
Germany, Eislingen
Germany, Bruchsal-Büchenau
Germany, Eislingen
square edge steel 45 mm
L-beam 450 x 15/300 x 20 mm
work height max. 850 mm
blade length 475 mm
notching width up to 52 mm
notching deepth up to 90 mm
punching pressure 80 t
hole punching press: capacity (dia. x thick.) 40 x 14 mm
hole punching press: capacity (dia. x thick.) 24 x 24 mm
total power requirement 9 kW
weight of the machine ca. 3,0 t
dimensions of the machine ca. 2,5 x 1,0 x 2,1 m
round bar steel 45 mm
square edge steel 45 mm
L-beam 450 x 15/300 x 20 mm
work height max. 850 mm
blade length 475 mm
notching width up to 52 mm
notching deepth up to 90 mm
punching pressure 80 t
hole punching press: capacity (dia. x thick.) 40 x 14 mm
hole punching press: capacity (dia. x thick.) 24 x 24 mm
total power requirement 9 kW
weight of the machine ca. 3,0 t
dimensions of the machine ca. 2,5 x 1,0 x 2,1 m
round bar steel 45 mm
square edge steel 45 mm
L-beam 450 x 15/300 x 20 mm
work height max. 850 mm
blade length 475 mm
notching width up to 52 mm
notching deepth up to 90 mm
punching pressure 80 t
hole punching press: capacity (dia. x thick.) 40 x 14 mm
hole punching press: capacity (dia. x thick.) 24 x 24 mm
total power requirement 9 kW
weight of the machine ca. 3,0 t
dimensions of the machine ca. 2,5 x 1,0 x 2,1 m
round bar steel 45 mm
square edge steel 45 mm
L-beam 450 x 15/300 x 20 mm
work height max. 850 mm
blade length 475 mm
notching width up to 52 mm
notching deepth up to 90 mm
punching pressure 80 t
hole punching press: capacity (dia. x thick.) 40 x 14 mm
hole punching press: capacity (dia. x thick.) 24 x 24 mm
total power requirement 9 kW
weight of the machine ca. 3,0 t
dimensions of the machine ca. 2,5 x 1,0 x 2,1 m
round bar steel 45 mm
square edge steel 45 mm
L-beam 450 x 15/300 x 20 mm
work height max. 850 mm
blade length 475 mm
notching width up to 52 mm
notching deepth up to 90 mm
punching pressure 80 t
hole punching press: capacity (dia. x thick.) 40 x 14 mm
hole punching press: capacity (dia. x thick.) 24 x 24 mm
total power requirement 9 kW
weight of the machine ca. 3,0 t
Model SD larger projection 500mm
The machine has 5 work stations:
⢠Punching station with automatic positioning table (SemiPaxy)
⢠Flat steel shears
⢠Angle steel shears
⢠Notching station
⢠Steel bar shears (round and square)
SemiPaxy positioning table with CNC control.
X axis 1000 mm
Y axis 400 mm
2 independently working cylinders for 2 work stations, hole punch
and scissors
- Roller conveyor 3m
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Vierkantstahl 45 mm
Winkelstahl 450 x 15/300 x 20 mm
Arbeitshöhe 850 mm
Messerlänge 475 mm
Ausklingbreite bis 52 mm
Ausklingtiefe bis 90 mm
Stanzdruck 80 t
Lochstanze: Kapazität (Drm. x Stärke) 40 x 14 mm
Lochstanze: Kapazität (Drm. x Stärke) 24 x 24 mm
Gesamtleistungsbedarf 9 kW
Maschinengewicht ca. 3,0 t
Raumbedarf ca. 2,5 x 1,0 x 2,1 m
Rundstahl 45 mm
Vierkantstahl 45 mm
Winkelstahl 450 x 15/300 x 20 mm
Arbeitshöhe 850 mm
Messerlänge 475 mm
Ausklingbreite bis 52 mm
Ausklingtiefe bis 90 mm
Stanzdruck 80 t
Lochstanze: Kapazität (Drm. x Stärke) 40 x 14 mm
Lochstanze: Kapazität (Drm. x Stärke) 24 x 24 mm
Gesamtleistungsbedarf 9 kW
Maschinengewicht ca. 3,0 t
Raumbedarf ca. 2,5 x 1,0 x 2,1 m
Rundstahl 45 mm
Vierkantstahl 45 mm
Winkelstahl 450 x 15/300 x 20 mm
Arbeitshöhe 850 mm
Messerlänge 475 mm
Ausklingbreite bis 52 mm
Ausklingtiefe bis 90 mm
Stanzdruck 80 t
Lochstanze: Kapazität (Drm. x Stärke) 40 x 14 mm
Lochstanze: Kapazität (Drm. x Stärke) 24 x 24 mm
Gesamtleistungsbedarf 9 kW
Maschinengewicht ca. 3,0 t
Raumbedarf ca. 2,5 x 1,0 x 2,1 m
Rundstahl 45 mm
Vierkantstahl 45 mm
Winkelstahl 450 x 15/300 x 20 mm
Arbeitshöhe 850 mm
Messerlänge 475 mm
Ausklingbreite bis 52 mm
Ausklingtiefe bis 90 mm
Stanzdruck 80 t
Lochstanze: Kapazität (Drm. x Stärke) 40 x 14 mm
Lochstanze: Kapazität (Drm. x Stärke) 24 x 24 mm
Gesamtleistungsbedarf 9 kW
Maschinengewicht ca. 3,0 t
Raumbedarf ca. 2,5 x 1,0 x 2,1 m
Rundstahl 45 mm
Vierkantstahl 45 mm
Winkelstahl 450 x 15/300 x 20 mm
Arbeitshöhe 850 mm
Messerlänge 475 mm
Ausklingbreite bis 52 mm
Ausklingtiefe bis 90 mm
Stanzdruck 80 t
Lochstanze: Kapazität (Drm. x Stärke) 40 x 14 mm
Lochstanze: Kapazität (Drm. x Stärke) 24 x 24 mm
Gesamtleistungsbedarf 9 kW
Maschinengewicht ca. 3,0 t
Modell SD grössere Ausladung 500mm
Die Maschine verfügt über 5 Arbeitsstationen:
• Stanzstation mit automatischem Positioniertisch (SemiPaxy)
• Flachstahlschere
• Winkelstahlschere
• Ausklinkstation
• Stabstahlschere (rund und vierkant)
SemiPaxy Positioniertisch mit CNC Steuerung.
X-Achse 1000 mm
Y-Achse 400 mm
2 unabhängig voneinander arbeitende Zylinder für 2 Arbeitsstationen, Lochstanze
und Schere
- Rollenbahn 3m