MH200 shrink wrapper
Marinha Grande
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
Portugal 
Portugal, Marinha Grande
Portugal, Marinha Grande
Italy, Posizione:viterbo
United Kingdom
United Kingdom
United Kingdom
Netherlands, Nieuwerkerk aan den IJssel
Germany, Gifhorn
Spain, Barcelona
Croatia, Vukovar
Netherlands, Nieuwerkerk aan den IJssel
France, Janville
France, Janville
Germany, Burgwald-Ernsthausen
Germany, Dabergotz
Germany, Dabergotz
Germany, Dabergotz
3D travel speed: 500mm/s
4-5th axis ready: Yes
700/900: 0.02 µm
Accumulated height (µm): 10
Accuracy: E0, MPE from- (0.7+0.25L/100) µm
Accuracy (20°C): (3+3L0/1000)μm
aforo: 25kg
Air Cushion: yes, full/semi-floating
Angular measurement resolution: 1 minute
Block Number: 1
Cabinet Support 23": Optional
Cabinet Support 32": Optional
Cable length: 3 mt
Chuck Length – Maximum: 22,4
CNC control: Optional
compatible counter: KA counter / KLD200 counter
Compatible tool material: Carbide, High Speed Steel
Compensation method: counter balance
cone iso: 40/50
conical tool: CAT-40
control: CNCFanuc 18i-M CNC Control
Control system/software: QC100/200/5200, M2, M3
Cooling time: 1.3 minutes to 3 minutes
digital resolution: 500- 0.05 µm
Dimensions: 325X340X690 mm
Effective stroke L0 (mm): 120 (4.5")
Exit sign: Double sine wave with 90° shift
Focus range (in): 2"
Focus range (mm): 50
Forward Speed: 519 mm/s (3-axis)
Imperial-Metric: Metric/Inch
iris diaphragm: Optional
Load capacity: 2000 lbs.
load height: 560 mm
machine dimensions: 1.50x0.55x1.70m
main engine: 15 hp
Mass Load: 180 kg
Maximum response speed: 50m/min
Measurement Interval: 0 - 972mm
Measurement uncertainty: 1.7 + 3L/1000, 1.9 [µm]
Measuring area: X 700, Y 1000, Z 700 [mm]
measuring force: 1N
Motorized X-Y Axis: Optional
No. of memorized programs: 50 programs (max.)
Operating Temperature: 0 to 45°C
optical edge detection: optional
output signal step: 20μm
Perpendicularity: 5 µm (after compensation)
Precision Fixed Lathe: Optional
Precision Rotary Lathe: Optional
profile lighting: Pattern
Protection Level: IP53
Range: 500x700x400mm
Reduction time: 5 sec
Regulation: Automatic thanks to built-in microprocessor
Repeatability: (2σ) Flat
Rod diameter range: 1/8″ – 1-1/4″
Rotative desk: two-axis Nikken
scale reference point: 50mm steps
Screen Diameter (in.): 16 "
Screen diameter (mm): 400
skate course: 600 mm
spindle speeds: 60-8000 rpm
stack autonomy: approx. 5 hours
Surface Lighting: Pattern
System Type: Upper Workbench
Table dimensions: 30" x 70"
Tension: 230 V
Tightening cycles: 2 to 7 seconds
Tightening measures: 2 ⌀ to 40 ⌀
tool stations: 21
Weight: 25kg
Working phase (mm): 540 x 130
Work Internship (in.): 21.25" x 5"
X axis measurement: 210mm
Z axis measurement: 420mm
Shrink fitting machine for TAUMAX MH200 tools.
Capable of continuously heating up to 30 times.
Available for steel and other metals.
All standard tapered mounts are available by simply changing the adapter flange.
Ø25, Ø30, Ø40, Ø50 Diameter of heating coils can be replaced
Able to prevent overheating and cool down manually by setting the machine