New TyreON T650M2 mobile complete tyre fitting package 26 Inch - side of a tire changer
Akersloot6460 km to "United States/Columbus"
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+31 6 537...
Show
+31 6 53701658
+31 72 540...
Show
+31 72 540 1002
Netherlands 
Netherlands, Akersloot
Netherlands, Akersloot
Netherlands, Akersloot
Netherlands, Akersloot
Netherlands, Akersloot
Netherlands, Akersloot
Netherlands, Akersloot
Netherlands, Akersloot
Netherlands, Akersloot
Netherlands, Akersloot
Netherlands, Akersloot
Netherlands, Akersloot
Netherlands, Akersloot
Netherlands, Akersloot
Rims 13 - 26 Inch
Wheels up to 750 kg - Ø 138 cm - 70 cm ↔
Mounting speed 1-speed | 7 rpm
Bead breaker force 2500 kg / 24.515 kN
Operation Electric-hydraulic
Gear motor-chuck 1.5 kW
Hydraulic pump 1.1 kW
Model Mobile - self installation set complete
Comes with Aircompressor + hose reel
Genset + Smart Control
Optional Mounting arm for passenger cars
Voltage 400V
Instrallation Side of a vehicle
Mobile - self installation set complete
Heavy duty mobile truck tyre changer machine for tubeless tyres on steel or aluminum rims of
Trucks, tractor units and trailers
City buses, coaches and commercial vehicles
The TyreON T650M2 mobile truck tyre changer is a powerful professional and compact device for mobile tyre repair.
TyreON T650M2
Mobile workshop -weight 470 kg - mounte on loading floor
The compact TyreON T650M2 is an electric hydraulic mobile tyre machine fortrucktyres up to 26 inch tyres with a safe 24V controller.
This mobile tyres machine for intensive use is a powerful changer for placement in a service van.
Simply roll the wheel to the service van and you can safely perform 8 automated movements for changing the truck tyres.
Benefits of mobile tyre fitting package
Install yourself, takes up little space
An opening of 145 cm heigh and 104 cm wide on the side or rear of the vehicle required
Wheels up to 750 kg - Easy operation thanks to convenient operating unit
Exta safe during driving, equipped with latches on the carriage and lifting arm
Own weight of only 470 kg
Complete set - total weight of 670 kg
TyreON supplies a complete mobile tyre fitting package, consisting of the TyreON T650M2, a generatorset, a hose reel, an air compressor and the TyreON Smart Control. The complete set can be placed in a van without complicated technical procedures.
The set includes
This tyre changer is built on a base frame with forklift holes. The required floorheight is 65 to 75 cm. The changer can be fixed to the loading floor using the base frame at the rear or the side of the van.
6.6 kW (8.3 kVA) E-start PH/400V/230V gasoline generator set with a 27 litre tank for 12 hours use. The operating panel is provided with 1*400V and 2*230V connections, a circuit breaker and battery charger. The exhaust can be extended with a flexible pipe.
Dimensions L84 x W61.5 x H75.3 (cm) - 115 kg
Industrial low-speed air compressor 3 kW / 1000 rpm / 200 litres / 10 Bar / 500 litres per minute. The large air tank has a quick coupler for connecting the hose reel.
Dimensions L55 x W55 x H157 (cm) - 60 kg
Hose reel with 20 metre air hose with 10 mm inside diameter, equipped with a digital air gun.
The hose reelcomes with a coupling to connect to the air compressor.
Dimensions L55 x W20 x H55 (cm) - 20 kg
Thanks to the TyreON Smart Control, the 6.6 kW mobile Pramac S8000 with a weight of 112 kg is sufficient.
The Smart Control ensures that the TyreON T650M2 and air compressor are never supplied with power simultaneously.
The controller is programmed in such a way that the air compressor is given priority.
Dimensions L25 x W25 x H13 (cm) - 5 kg
Use compressed air and the TyreON T650M2 simultaneously
One can use both machines simultaneously, except when the air compressor rotates in order to fill the air tank. Once there is sufficient air in the tank you can use the TyreON T650M2 tyre changer again.
TyreON T650M2 - mobile tyre fitting package
Portable controllert with emergency stop, joystick and foot pedal
4 hydraulic clamping jaws for clamping and lifting the rim
The lifting arm with the jaw and the rim can be moved horizontally on the sliding carriage.
The mounting arm is moveable by hand and lockable in 3 positions
The mounting head can be manually rotated and locked
Powerful left and reight rotatingengine for the clamping jaw
High-quality, powerful hydraulic pump
CE-certified
With anchoring holes, delivered in ready-to-use state
The technique and possibilities of the T650M2 mobile tyre fitting package
Technical details T650M2 (400V)
For truck tyres with rim size 13 - 26 Inch A
Maximum wheel diameter 138 cm D
Maximum wheel width 70 cm C
Maximum wheel weight 750 kg
Clamping range (chuck) 10 - 68,5 cm (27 Inch)
Bead breaker force 2500 kg / 24.515 kN F
Operating pressure - hydraulic 130 Bar
Performance hydraulic pump motor 1.1 kW F
Performance gear motor - electric rotation of the chuck 1.5 kW E
Mounting speed (chuck) - clockwise and anticlockwise 1 - 7 rpm
Number of automated movements 8
Controllers operating voltage 24 Volt (DC)
Positions of the mounting arm on the sliding carriage 3
Weight 470 (670 complete) kg
Noise level 40 - 65 dBA
Rotating chuck with 4 self centering clamping arms ✓
Connection voltage 400V - 3Ph
Fusing 16A
Footprint (L x W) of the mobile truck tyre changer 122 x 105 cm
Required height 145 cm
Also available separately
The TyreON T650M2 mobile tyre changer is also available separately and is available from stock.
For more information:
TyreON T650M2 mobile truck tyre changer >>
T650M2 mobile complete tyre fitting package 26 Inch - side of a vehicle