Eurocomach ES85SB.4 tracked excavator for sale by auction
6239 km to "United States/Columbus"
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+47 90 52 ...
Show
+47 90 52 63 30
Norway, HEIMDAL
Norway
Norway
Norway, HEIMDAL
Norway
Norway, HEIMDAL
Auction
Norway, Innlandet
Norway, HEIMDAL
Auction
Norway, Møre og Romsdal
Norway, HEIMDAL
Norway, HEIMDAL
Norway, Vikersund
Norway, HEIMDAL
Norway, HEIMDAL
Norway, HEIMDAL
30,000 kg
Digging depth
7.305 m
Norway, Gaupne
Norway, HEIMDAL
Norway, HEIMDAL
Norway, HEIMDAL
Norway, HEIMDAL
Excavator parts
- Fixed sanding drawer
- Profile drawer
- Tooth tray
Undercarriage is about 50%. The machine has Beka max central lubrication. All services have been followed. The machine is delivered fully certified and with some cosmetic improvements.
ENGINE
Type: Yanmar 4TNV98
Power: KW-HP 46,3-62,9
Displacement: CC 3.319
Number of Cylinders: 4
Cooling: Water
Consumption: Lt/H 8,7
Alternator: V(A) 12(55)
Battery: V(Ah) 12(100)
HYDRAULIC SYSTEM
Circuit Type: Load Sensing Closed Center System With Flow Sharing Control Valve
Pump Type: 1 LS Variable Pump + 1 Gear Pump
Pump Displacement: cc 84+9
Pump Capacity: Lt/Min 185+20
Max. Circuit Pressure Bar 290 - 200 - 35
PERFORMANCE
Max Digging Depth: mm 3.800 (4.150)
Max Dumping Height: mm 5.220(5.470)
Bucket Breaking Force: daN 5.850
Arm Breaking Force: daN 4.350
Traction Force: daN 7.960
Ground Bearing Pressure: kg/cm2 0,41
Max Slope: 60%-30°
DIMENSIONS
Maximum Width: mm 2.320
Total Height: mm 2.560
Rear Rotation Radius: mm 1.155
Digging Arm Length STD: mm 1.760(2.110)
Track Width: mm 459
Rollers Number Each Side: 5/1 (Rubber) 6/1 (Steel)
FILLINGS
Fuel Tank: lt 105
Hydraulic Oil Tank: lt 90
Hydraulic Circuit Capacity: lt 120
Cooling System Capacity: lt 25
Engine Oil: lt 10
CONTROLS
Boom, Dipper Stick, Bucket and Turret Swing: 2 Pilot Joysticks
Tracks Movement: 2 Pilot Levers
Dozer Blade: Pilot Lever
Aux 1-2 Circuit Main High Flow With Latch: Elevtropropotional Switch On Joystick
Location: Norway.
Fast pusseskuffe
Profilskuffe
Tannskuffe
Understell er ca. 50%. Maskinen har Beka max sentralsmøring. Alle servicer har blitt fulgt. Maskinen leveres ferdig sertifisert og noe kosmetiske utbedringer.
ENGINE
Type: Yanmar 4TNV98
Power: KW-HP 46,3-62,9
Displacement: CC 3.319
Number of Cylinders: 4
Cooling: Water
Consumption: Lt/H 8,7
Alternator: V(A) 12(55)
Battery: V(Ah) 12(100)
HYDRAULIC SYSTEM
Circuit Type: Load Sensing Closed Center System With Flow Sharing Control Valve
Pump Type: 1 LS Variable Pump + 1 Gear Pump
Pump Displacement: cc 84+9
Pump Capacity: Lt/Min 185+20
Max. Circuit Pressure Bar 290 - 200 - 35
PERFORMANCE
Max Digging Depth: mm 3.800 (4.150)
Max Dumping Height: mm 5.220(5.470)
Bucket Breaking Force: daN 5.850
Arm Breaking Force: daN 4.350
Traction Force: daN 7.960
Ground Bearing Pressure: kg/cm2 0,41
Max Slope: 60%-30°
DIMENSIONS
Maximum Width: mm 2.320
Total Height: mm 2.560
Rear Rotation Radius: mm 1.155
Digging Arm Length STD: mm 1.760(2.110)
Track Width: mm 459
Rollers Number Each Side: 5/1 (Rubber) 6/1 (Steel)
FILLINGS
Fuel Tank: lt 105
Hydraulic Oil Tank: lt 90
Hydraulic Circuit Capacity: lt 120
Cooling System Capacity: lt 25
Engine Oil: lt 10
CONTROLS
Boom, Dipper Stick, Bucket and Turret Swing: 2 Pilot Joysticks
Tracks Movement: 2 Pilot Levers
Dozer Blade: Pilot Lever
Aux 1-2 Circuit Main High Flow With Latch: Elevtropropotional Switch On Joystick
Selges for kunde. Lokasjon: 7760 Snåsa.