Nachi KX61-3 KX71-3 KX71-3S RC348-61110 hydraulic pump for Kubota KX61-3 KX71-3 KX71-3S mini excavator
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+86 199 246...
Show
+86 199 2461 6345
China
China
China
China
China
China
Romania
Lithuania, Telšiai
Lithuania, Telšiai
Mexico, Chihuahua
Component: Main Hydraulic Pump Assembly
OEM Part Number: RC348-61110 (also handles engineering revisions RC348-61112 and RC348-61113)
Machine Compatibility:
Kubota KX61-3
Kubota KX71-3
Kubota KX71-3S
Condition: Original Brand New / OEM Specification
2. Technical Specifications
Pump Type: Triple Section Pump (Dual Variable Displacement Axial Piston Pump + Integrated Gear Pump)
System Output: Split-flow piston engineering that provides dedicated independent oil supply to the travel tracks, boom, and arm circuits for simultaneous multi-functioning without speed drops.
Operating Pressure: Factory-set to Kubota's exact system relief specifications (typically 21-23 MPa) to maintain breakout force.
Structure: Low-profile, compact cast iron and aluminum housing designed to bolt directly into the narrow Dash-3 engine bay.
3. Critical Installation Requirements
Case Priming (Mandatory)
You must manually fill the main pump housing with clean hydraulic oil through the highest case drain port BEFORE starting the engine for the first time. Operating a variable piston pump dry for even a few seconds will instantly score the cylinder block face and destroy the piston slippers.
Complete Hydraulic Decontamination
If the previous pump failed mechanically (sending steel or bronze debris into the system), you must drain and clean the hydraulic oil reservoir, flush the main control valve block, and clear out the hydraulic oil cooler lines. Trapped debris will quickly scratch the internal wear parts of the new pump.
Filtration and Fluid Change
Always replace the suction strainer, pilot filter, and high-pressure return filter with brand-new elements during installation. Fill the system using only fresh, clean ISO VG46 or Kubota-recommended anti-wear hydraulic oil.
Air Bleeding Protocol
After installation, run the engine at a low idle for 10 minutes. Slowly cycle each cylinder function (boom, arm, bucket, track travel) to its full limit without a workload to safely bleed any trapped air pockets back into the reservoir.
4. Frequently Asked Questions (FAQ)
Q: Are the pumps for the KX61-3, KX71-3, and KX71-3S completely identical?
A: Yes, these specific Dash-3 mini excavator models share the same engine configuration, chassis platform, and hydraulic layout, making part number RC348-61110 a direct interchangeable fit across all of them.
Q: My excavator slows down dramatically or stalls the engine when I use the boom and track at the same time. Is the pump broken?
A: This is a classic symptom of worn internal piston regulators or excessive internal oil bypass inside the pump. When the pump cannot properly adjust its swash-plate angle to match the workload, it overloads the engine. Replacing the pump assembly restores original speed and power.
Q: Does this pump include the regulators pre-installed?
A: Yes, our OEM Brand New pumps come as complete assemblies, featuring the pressure compensation regulators and internal control valves pre-calibrated and tested straight from the factory floor.
5. Shipping & Logistics
Packaging: Thoroughly drained of test fluids, coated in anti-corrosion protective oil, capped with heavy-duty port plugs, and packed inside a reinforced export shipping box.
Transit Time: Global express air freight via DHL/FedEx/UPS typically delivers within 3 to 7 business days directly to your shop or job site.