Haas DS30Y metal lathe
Kaiserslautern
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+49 162 58...
Show
+49 162 5858448
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Location: BE
Counter Spindle: yes
Driven Tools: yes
Spindle Power: 22.4 kW
Chuck size (main): 10.0 in / 254 mm
Max part swing: 21.0 in / 533 mm
Max cutting diameter (with BMT65 turret): 13.75 in / 349 mm
Max cutting length (varies with workholding): 32.5 in / 826 mm
Bar capacity: 3.00 in / 76 mm
Between centers: 32.5 in / 826 mm
X: 472 ipm / 12.0 m/min
Y: 472 ipm / 12.0 m/min
Z: 945 ipm / 24.0 m/min
Spindle nose: A2-6
Drive system: Direct speed, belt drive
Max torque: 275 ft-lbf @ 500 rpm / 373 Nm @ 500 rpm
Draw tube bore: 3.0 in / 76 mm
Spindle bore: 3.50 in / 88.9 mm
Max speed: 60 rpm
Max rating: 5.0 hp / 3.7 kW
Positioning (±): 0.01°
Brake diameter: 13.9 in / 353 mm
Brake holding torque: 250 ft-lbf / 339 Nm
Control type: Interpolated motion and positioning
Chuck size: 8.3 in / 210 mm
Spindle bore ø (non-through): 0.81 in / 20.7 mm
OD vs ID tools: Any combination (will vary with turret)
Boring bar rear clearance (from back of turret): 4.00 in / 102.0 mm
Drive ratio: 1:1
Tooling: BMT65
Coolant capacity: 55 gal / 208 L
Air required: 4 scfm @ 100 psi / 113 L/min @ 6.9 bar
Inline air hose: 3/8 in
Coupler (air): 3/8 in
Minimum air pressure: 80 psi / 5.5 bar
Spindle power: 30.0 hp / 22.4 kW
Input AC voltage (3-phase) – low: 220 VAC; full load amps: 70 A
Input AC voltage (3-phase) – high: 440 VAC; full load amps: 35 A
Domestic pallet: 171 in x 90 in x 98 in / 434 cm x 229 cm x 249 cm
Export pallet: 171 in x 90 in x 98 in / 434 cm x 229 cm x 249 cm
Capacities
Feedrates (rapids)
Axis motors (max thrust)
X: 4100 lbf / 18238 N
Y: 2300 lbf / 10231 N
Z: 5100 lbf / 22686 N
Main spindle
Main spindle C axis
Secondary spindle
Spindle nose: A2-5
Drive system: Direct speed
belt drive
Max rating: 15.0 hp / 11.2 kW
Max speed: 4000 rpm
Max torque: 100 ft-lbf @ 870 rpm / 135.6 Nm @ 870 rpm
Secondary spindle C axis
Max rating: 5.0 hp / 3.7 kW
Max speed: 60 rpm
Positioning (±): 0.01°
Brake diameter: 8.5 in / 216 mm
Brake holding torque: 140 ft-lbf / 190 Nm
Control type: Interpolated motion and positioning
Secondary spindle positioning (M119)
Positioning (±): 0.02°
Brake diameter: 8.5 in / 216 mm
Control type: Positioning only
Turret
Live tooling
Max speed: 4000 rpm
General
Air requirements
Electrical specification
Drive system: Direct speed
belt drive
Dimensions – shipping